Chief Delphi - pic: New wheel CAD

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: New wheel CAD (http://www.chiefdelphi.com/forums/showthread.php?t=58671)

CraigHickman

07-09-2007 13:56

pic: New wheel CAD

loading photo ...

AdamHeard

07-09-2007 13:59

Re: pic: New wheel CAD

Craig Hickman; Fastest CADer on the West Coast.

.289 seems really light, is this a 4? (if that's a 1/2" hex, that seems about right)

I can't really tell from the pic, is there a tread lip on both sides? dimensions of that? (Mine was 1/16"x1/16" and it seems to be enough)

Do you guys broach or EDM the hex?

CraigHickman

07-09-2007 14:58

Re: pic: New wheel CAD

We're gonna broach it, mainly because we don't have access to a EDM.

Yep, it's a 4 inch wheel, and there's a lip on both sides, 1/16th by 1/16th. We've used that size lip for the last 3 years with amazing success (as in never needing to change out the roughtop for the entire season!)

I've always wondered if I am the fastest... in FIRST at least. Maybe we should have some sort of competition...

Madison

07-09-2007 15:18

Re: pic: New wheel CAD

Quote:

Originally Posted by 114ManualLabor (Post 641254)

A competition might be fun. Of course, I do this stuff for a living, so I have to be fast. :)

Brandon Holley

08-09-2007 01:29

Re: pic: New wheel CAD

Quote:

Originally Posted by M. Krass (Post 641258)

A competition might be fun. Of course, I do this stuff for a living, so I have to be fast. :)

yeah me too but im not one to brag

All times are GMT -5. The time now is 00:31.