Chief Delphi - [OCCRA]: vex balls

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- OCCRA Q&A (http://www.chiefdelphi.com/forums/forumdisplay.php?f=140)

- - [OCCRA]: vex balls (http://www.chiefdelphi.com/forums/showthread.php?t=58972)

AaronJ

01-10-2007 16:00

[OCCRA]: vex balls

How are the vex balls sitting on the table? are they just balanced or are they in a hole or even standing on top of somethign else? Another thing is how far are the balls from their starting point to the edge of the table that you have to push them off of?

Mike Martus

01-10-2007 17:38

Re: [OCCRA]: vex balls

The VEX balls ( 2 - 16" and 1 - 10" ) are sitting on a Kee Clamp flange plate. This fitting has a 1.25 hole the ball will actually rest in. The outside dia ( which the ball will never touch is 4".

You will need to calculate the distance. (Simple Trig).

Note: They are not on a table.

All times are GMT -5. The time now is 04:34.