Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   USB - Serial cable (http://www.chiefdelphi.com/forums/showthread.php?t=59321)

Tottanka 30-10-2007 19:26
Re: USB - Serial cable
 
ok. now it gives me the red led, but keeps on searching....
sorry for all the mass...

DavidGitz 31-10-2007 10:01
Re: USB - Serial cable
 
We kept getting the problem you are having. We tried downloading the default camera.hex file that comes with the default code on Kevin Watson's page, and it worked. Then we used the default code from there on. I think the problem had something to do with a conflict between pwm01 and pwm02.

Tottanka 31-10-2007 10:17
Re: USB - Serial cable
 
Quote:
Originally Posted by DavidGitz (Post 648889)
We kept getting the problem you are having. We tried downloading the default camera.hex file that comes with the default code on Kevin Watson's page, and it worked. Then we used the default code from there on. I think the problem had something to do with a conflict between pwm01 and pwm02.
Which one is it that worked for you?

DavidGitz 31-10-2007 10:24
Re: USB - Serial cable
 
We had to start over with the default code. But first download the default code and immediately load the precompiled hex file to the controller without compiling anything, since the code is supposed to work with the camera immediately.

Tottanka 31-10-2007 14:42
Re: USB - Serial cable
 
Yea, but what code is taht?
Bells and whistles 2.1/2.0 ?

DavidGitz 01-11-2007 09:45
Re: USB - Serial cable
 
Sorry yes the Bells and Whistles 2.1

Tottanka 01-11-2007 18:28
Re: USB - Serial cable
 
It doesnt seem to work for me.
The camers sees the light, stops on it momentarily, red light is on, and then just keeps on searching as if it never saw the light.
Anyone familiar with that?

Alan Anderson 01-11-2007 20:23
Re: USB - Serial cable
 
Quote:
Originally Posted by Tottanka (Post 649179)
It doesnt seem to work for me.
The camers sees the light, stops on it momentarily, red light is on, and then just keeps on searching as if it never saw the light.
Anyone familiar with that?
That's #14 on the CMUcam2 FAQ I pointed to a few days ago. Read it and follow the suggestions.


All times are GMT -5. The time now is 19:37.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi