[OCCRA]: Pneumatic Diagram
 

Does anyone have a Pneumatic diagram, something came unplugged from our electrical box and now our compressor will not turn off when the tanks are full. Anyone have the solution to this problem?

Re: [OCCRA]: Pneumatic Diagram
 

This is the wrong place for general questions.

Please use the General OCCRA Forum.

Answer: Consult the "How to Manual" That all teams have.

Answer: If the compressor is not turning off there are several issues to look at.

1. Do you have air leaks? If so repair them.

2. Your pressure switch is either damaged or improper in the way it is installed.

3. The compressor is directly wired to a unregulated power source - This is illegal as it is bypassing the circuit breaker and fuses. remember unlike FIRST we use an automotive relay in the circuit powered thru a spike getting power only when the robot is turned on.