Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)
-   -   Transmisson? (http://www.chiefdelphi.com/forums/showthread.php?t=59559)

steadfasttuna 12-11-2007 10:08
Transmisson?
 
Anyone have schematics for a 3-speed transmission made out of a cordless drill?:D

Billfred 12-11-2007 10:29
Re: Transmisson?
 
Yup.

http://www.chiefdelphi.com/media/papers/1592

roach1051 17-11-2007 16:52
Re: Transmisson?
 
We used the white paper as a reference to use the Dewalts in 2006. They worked fine. We even used a single Dewalt trans with two CIM motors on the input side. We built a custom dual motor mount and 3:1 reduction gears that fed into the single Dewalt trans that we shifted with the servos in the KOP. It was a pretty good system. The beauty of the Dewalt trans is that it is very light, especially compared to last year's Banebot trans.

steadfasttuna 27-11-2007 15:07
Re: Transmisson?
 
thanks guys:D

AJ R 27-11-2007 17:29
Re: Transmisson?
 
Quote:
Originally Posted by roach1051 (Post 652350)
We used the white paper as a reference to use the Dewalts in 2006. They worked fine. We even used a single Dewalt trans with two CIM motors on the input side. We built a custom dual motor mount and 3:1 reduction gears that fed into the single Dewalt trans that we shifted with the servos in the KOP. It was a pretty good system. The beauty of the Dewalt trans is that it is very light, especially compared to last year's Banebot trans.
Our team is doing something similar to this. Do you have any pictures you can post, or any tips on making this work. Any information would be appreciated.

Thanks


All times are GMT -5. The time now is 05:46.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi