pic: Andy Baker at Ramp Riot
 

mecanum?
 

is that a new mecanum wheel design i see closest to us on the table, if so, tell me more!

Re: pic: Andy Baker at Ramp Riot
 

Yes, that is the new 6" Mecanum style wheel from AndyMark, with a hub attached to it.

It consists of 2 steel plates (0.04" thick) welded together, with 16 rollers. The estimated load of a 4 wheel system is about 250 lbs. The rollers will be black, non-marking SBR rubber

Cost will be $275 for a set of 4 wheels, or $70 for one. The same pair of wheel plates can be assembled into a right or left-handed wheel. They are designed to be ambidextrous.

We hope to have these ready for sale during the 1st or 2nd week of December.

Sincerely,
Andy Baker

Re: pic: Andy Baker at Ramp Riot
 

awesome, thanks for the fast reply, i might have to pick up a set of these to prototype a drivetrain set up that i've been thinking of since the first time i saw mecanums back during the tetra game.

Re: pic: Andy Baker at Ramp Riot
 

If Andy Baker lost an arm, he would still be ambidextrous.


Sorry, I couldn't resist.

Re: pic: Andy Baker at Ramp Riot
 

I just wanted to thank Andy for both his support of Ramp Riot and his sponsorship of Team in a Box. It really is nice for the visiting teams when they can talk to someone like Andy and view his entire line of products.
Also Andy's continuing sponsorship of Team in a Box allows hundreds of teams to receive this disk free of charge.

On behalf of all the teams of Ramp Riot.....Thank You!!

Re: pic: Andy Baker at Ramp Riot
 

And here is a picture of our new 6" Mecanum wheel.

Andy