Chief Delphi - pic: Programming prototyping board

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Programming prototyping board (http://www.chiefdelphi.com/forums/showthread.php?t=59844)

Andrew Schuetze

03-12-2007 00:46

pic: Programming prototyping board

loading photo ...

Qbranch

03-12-2007 00:47

Re: pic: Programming prototyping board

Do I spy a drill motor from way back when? :]

Looks like you all have everything you need in case of a rainy afternoon... :o

What kind of power supply are you using? Where are you getting one beefy (and back EMF immune) enough to run a few DC motors? :confused:

-q

Andrew Schuetze

03-12-2007 23:14

Re: pic: Programming prototyping board

Quote:

Originally Posted by Qbranch (Post 655017)

Do I spy a drill motor from way back when? :]

-q

It's been a few years since those were in use and we have a few spares in the shop via a FIRST clearance sale of sorts and this has that KOP plastic housing. I'm going to pass on your pwr supply question to our mentor who is purchasing them for this application.

Andrew Schuetze

08-12-2007 18:30

Re: pic: Programming prototyping board

Quote:

Originally Posted by Qbranch (Post 655017)

What kind of power supply are you using? Where are you getting one beefy (and back EMF immune) enough to run a few DC motors? :confused:

-q

Testing performed today indicates that the power supply pictured has enough amperage to run a Globe or Seat motor from years back but not enough for the Bosch drill motors. So either we add in a battery connector and lug around the lead acid cells or we switch out to the seat motor or FP:ahh:

Not sure if one sees back EMF through the victor speed controllers:confused:

All times are GMT -5. The time now is 13:10.