Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Our vex robot for quad quandry (http://www.chiefdelphi.com/forums/showthread.php?t=60128)

Joe G. 15-12-2007 15:28

pic: Our vex robot for quad quandry
 

Leav 15-12-2007 15:29

Re: pic: Our vex robot for quad quandry
 
that robot looks very nice!
how fast does the arm move?
what is that sensor on the arm?

-Leav

Joe G. 16-12-2007 13:18

Re: pic: Our vex robot for quad quandry
 
Quote:

that robot looks very nice!
Thanks!

Quote:

how fast does the arm move?
It can go from bottum to scoring position in a little over 5 seconds

Quote:

what is that sensor on the arm?
The device on the side of the arm is another motor used to operate a mostly hidden pulley system that draws the hook up and down. The hook grabs rings by pressing down on them, which causes them to flip up to vertical, and ring themselves around the hook. The pulley system can then either raise the hook to keep them solidly on the hook, or lower it, to drop them on the goal. The wings are used to hold the goal firmly in place, as well as increase our range for drawing rings into a position where they can be picked up.

Techno-Turkey 19-12-2007 13:56

Re: pic: Our vex robot for quad quandry
 
The plow/goal holder is a nice feature. Why aren't you going to a tournament?


All times are GMT -5. The time now is 17:33.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi