pic: Atlas Supporting the Earth
 

Re: pic: Atlas Supporting the Earth
 

thats a good one.......thank god it wasnt me.lol

Re: pic: Atlas Supporting the Earth
 

our red ball did not seem to fill up as much as that blue ball

is any other teams having this problem???

Re: pic: Atlas Supporting the Earth
 

I wonder how many teams had that idea. Even more scary is I bet everyone had that idea at the same time.
I had the unfortunate pleasure of being my team's Atlas. Man that pose hurt.

Re: pic: Atlas Supporting the Earth
 

lol...unfortunattly i wont see our balls till monday......then i could do the pose.......alright if i steal it?????

Re: pic: Atlas Supporting the Earth
 

I was wondering why we got our son an air compressor for Christmas...now I know!

Re: pic: Atlas Supporting the Earth
 

I don't really know how our ball looks when it's completely inflated...we couldn't fill it up entirely because it wouldn't have fit through the door -.-

Re: pic: Atlas Supporting the Earth
 

ive seen austin powers goldmember too much for that to look good

Re: pic: Atlas Supporting the Earth
 

We had students with hot air fill it up. The last bit was with a compressor though cuz its tough.

Re: pic: Atlas Supporting the Earth
 

I couldn't hold that pose for more than 7 seconds before it slipped on me! :yikes:

Re: pic: Atlas Supporting the Earth
 

I did that too, but it wasn't long before someone came up and tried to "knock the world off my shoulders."

Re: pic: Atlas Supporting the Earth
 

Our team was in on it too:
http://www.chiefdelphi.com/forums/sh...threadid=60858

Re: pic: Atlas Supporting the Earth
 

it isnt that hard i held it for at least 30 until a teammate kicked me over

Re: pic: Atlas Supporting the Earth
 

Cool shot! Someone on my team got a similar picture today during our work session, and made a comment about shrugging just before the ball fell. :rolleyes:

For a photo break, we went outside for a while. Cloudy and about 70 degrees here in St. Louis, with south winds at about 20 MPH. We found that our trackball can be shoved through a standard 3 ft. doorway when inflated to 128" circumference. However, when a gust of wind came along, it suddenly developed a lot of lift and one of our mentors had to yell for help to keep it from being ripped from his grasp.

Manipulating these gamepieces will be a challenge. :)

Re: pic: Atlas Supporting the Earth
 

I think this is the understatement of the year.

Re: pic: Atlas Supporting the Earth
 

Indeed. 40" diameter was a shock to us, so we posted the photo (and, it seems, so did several others) so teams would get an idea of that dimension.

It's also somewhat heavy (I guess 7-10 pounds, some have weighed theirs in at about 8 pounds) and the outer covering is a bit slippery (but not a lot). The problem with a human holding it is that you really can't wrap your arms around it, so at best you're grip is less than 180 degrees apart. It definitely can get away from you easily.

We also did some experiments launching it to about 8 feet in the air, from about ground level. That takes quite a bit of push. This means that a catapult is feasible, but it'll have to be substantial - no latex tubing or air cylinders here.

Don

Re: pic: Atlas Supporting the Earth
 

It was a great treat watching Al Skierkiewicz lift the ball and put it back in position - with a little help from his wife - at the FIRST Kick Off. It was also fun to see how high the balls could bounce when pushed off. Also, I rolled one into another one and was reminded of the game of pool. The corner pocket would have to be massive though. :)