Chief Delphi - G<38> Signal To Pass Rule

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - G<38> Signal To Pass Rule (http://www.chiefdelphi.com/forums/showthread.php?t=60857)

aaeamdar

06-01-2008 17:34

G<38> Signal To Pass Rule

Josh Murphy

06-01-2008 17:36

Re: G<38> Signal To Pass Rule

As far as I understand you have 6 seconds to move, if you don't then you get penalized.

Laaba 80

06-01-2008 17:37

Re: G<38> Signal To Pass Rule

Quote:

<G41> Permitting To Pass - When a ROBOT has received a signal to pass (see Rule <G38>), or
when the REFEREE signals that a ROBOT is pinning an opponent in place, the ROBOT
shall have 6 seconds to move out of the way and create a “passing lane” to allow the
opposing ROBOT through. ROBOTS that fail to do so within 6 seconds after the “signal to
pass” shall receive a PENALTY. Repeated infractions will result in a YELLOW CARD being
issued to the ROBOT.

Just needed to read through the manual a little farther.
Joey

Miniflash

06-01-2008 20:36

Re: G<38> Signal To Pass Rule

the real question to ask is Define: Light Bump... lol

GaryVoshol

06-01-2008 20:42

Re: G<38> Signal To Pass Rule

Quote:

Originally Posted by Miniflash (Post 670374)

the real question to ask is Define: Light Bump... lol

Less than a high-speed ram.

Miniflash

06-01-2008 20:43

Re: G<38> Signal To Pass Rule

haha define "high speed" lol :cool:

Chaos204

06-01-2008 20:54

Re: G<38> Signal To Pass Rule

this is just a hunch, actually more of a side thought.

does anybody think this whole thing is going to be very much dictated by how we play the game. The first week i mean. I am somewhat worried about giving up too much torque for speed.

mluckham

07-01-2008 00:03

Re: G<38> Signal To Pass Rule

We are chuckling about the 'Gentle Bump' signal also ... but after looking high and low for a rule using that wording, there is no corresponding rule that says the bumpee has to pay any attention to the signal!

EricH

07-01-2008 00:06

Re: G<38> Signal To Pass Rule

Quote:

Originally Posted by mluckham (Post 670700)

Well--They don't have to, but it'll cost them after 6 seconds.

Quote:

Originally Posted by Section 7.3.5.2 Robot Actions

<G41> Permitting To Pass - When a ROBOT has received a signal to pass (see Rule <G38>), or when the REFEREE signals that a ROBOT is pinning an opponent in place, the ROBOT
shall have 6 seconds to move out of the way and create a “passing lane” to allow the opposing ROBOT through. ROBOTS that fail to do so within 6 seconds after the “signal to pass” shall receive a PENALTY. Repeated infractions will result in a YELLOW CARD being issued to the ROBOT.

There is the rule you couldn't find.

Arefin Bari

07-01-2008 00:07

Re: G<38> Signal To Pass Rule

You will have robots flying everywhere to get through the laps as many times as possible. I am assuming that a robot can get hit at 16 fps (not intentionally). Make your robot robust.

All times are GMT -5. The time now is 05:31.