Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Height of overpass (http://www.chiefdelphi.com/forums/showthread.php?t=60950)

Evert 07-01-2008 11:16

Height of overpass
 
I can't find the exact height of the overpass. I've checked the Arena Manual but can't find anything.

Any help would be appreciated

Nate Laverdure 07-01-2008 11:21

Re: Height of overpass
 
As per Section 6 of the manual, page 6:
Quote:

The horizontal portion of the OVERPASS is 6-1/2 feet above the floor.

IndySam 07-01-2008 11:22

Re: Height of overpass
 
6.2.2 The OVERPASS

The horizontal portion of the OVERPASS is 6-1/2 feet above the floor.

Elgin Clock 07-01-2008 11:25

Re: Height of overpass
 
Pages 5 & 6 of The Arena.

JesseK 07-01-2008 11:27

Re: Height of overpass
 
Is this the bottom, middle, or top of the overpass rail that's 6.5' from the floor?

fabalafae 07-01-2008 11:32

Re: Height of overpass
 
The top rail where the trackballs sit is 6.5' from the floor.

Elgin Clock 07-01-2008 11:32

Re: Height of overpass
 
Quote:

Originally Posted by JesseK (Post 671082)
Is this the bottom, middle, or top of the overpass rail that's 6.5' from the floor?

I knew that question was next for some reason. lol

Looking at the multiple CAD drawings here may give you a more exact point that the 6.5' mark is.
http://www.usfirst.org/community/frc...t.aspx?id=7684

I haven't had time to look at them in depth, but probably will in a little bit, and then I'll try and come up with a better answer as I CAD everything out.

IndySam 07-01-2008 12:40

Re: Height of overpass
 
Quote:

Originally Posted by fabalafae (Post 671090)
The top rail where the trackballs sit is 6.5' from the floor.

I would advise against planning for an exact height. You should always plan for the specs to be a little off.

The fields usually don't maintain the exact specs for many reasons, damage, settling, changes to ease construction, sagging.....

Plan for it to be the correct but be prepared for it to be a bit off.

EricH 07-01-2008 14:11

Re: Height of overpass
 
Quote:

Originally Posted by IndySam (Post 671153)
I would advise against planning for an exact height. You should always plan for the specs to be a little off.

The fields usually don't maintain the exact specs for many reasons, damage, settling, changes to ease construction, sagging.....

Plan for it to be the correct but be prepared for it to be a bit off.

FIRST explicitly says to expect changes of up to 1/4". This is due to different crews setting the thing up. (Trust me, it's harder to set up a field than it sounds.)


All times are GMT -5. The time now is 23:41.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi