Chief Delphi - pic: 254/968 Finished Parts

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: 254/968 Finished Parts (http://www.chiefdelphi.com/forums/showthread.php?t=61035)

Cory	08-01-2008 00:53

pic: 254/968 Finished Parts

loading photo ...

s_forbes

08-01-2008 00:56

Re: pic: 254/968 Finished Parts

Aw, six wheel drive again? I was hoping to see a beautifully machined car-type chassis with independent suspension, disk brakes, and automatic transmission. Then again, those parts still look pretty.

Madison

08-01-2008 00:57

Re: pic: 254/968 Finished Parts

Y'all are working almost as fast as we are. ;)

AdamHeard

08-01-2008 01:07

Re: pic: 254/968 Finished Parts

Wow.... that new CNC being put to good use already.

Cory	08-01-2008 01:35

Re: pic: 254/968 Finished Parts

Quote:

Originally Posted by AdamHeard (Post 672023)

Wow.... that new CNC being put to good use already.

Yup. It's been running pretty much 8 hours a day for the last 3 days

Travis Covington

08-01-2008 02:46

Re: pic: 254/968 Finished Parts

It's cool that we were able to use these same blocks for our current swerve design. It saved a lot of time not having to redesign a similar bearing block specific to our new drivetrain.

AdamHeard

08-01-2008 03:21

Re: pic: 254/968 Finished Parts

Quote:

Originally Posted by Travis Covington (Post 672068)

It's cool that we were able to use these same blocks for our current swerve design. It saved a lot of time not having to redesign a similar bearing block specific to our new drivetrain.

Wow..... that is the most innocently worded bombshell I have heard all season...

waialua359

08-01-2008 03:28

Re: pic: 254/968 Finished Parts

very nice bearing blocks. We just finished making ours too. :D
Yours look like they've been wet sanded and polished.:ahh:

Cory	08-01-2008 03:30

Re: pic: 254/968 Finished Parts

Quote:

Originally Posted by waialua359 (Post 672081)

very nice bearing blocks. We just finished making ours too. :D
Yours look like they've been wet sanded and polished.:ahh:

No polishing. That's the finish straight out of the mill.

Dan Richardson

08-01-2008 10:04

Re: pic: 254/968 Finished Parts

I am so envious :-(

All times are GMT -5. The time now is 12:29.