BEST USE of the IR Remote!!!
 

With all of the issues we've read about the IR, I think Dave Lavery and co. were hoping teams would look beyond the box and figure what they would do with it.
I havent seen it in another thread and would think that teams will eventually catch on to this.
Hint:
1. We dont know where they are placing the balls since its random? Right??????
2. We think its a waste of time to control the robot using the IR since the range is limited?

What are we thinking of?:D :D :D

Re: BEST USE of the IR Remote!!!
 

using the Remote to tell the robot what autonomous to run.... :ahh:

Re: BEST USE of the IR Remote!!!
 

ahh I get it, since there are 4 balls and you can program 4 buttons... you tell your robot which ball slot to go to using the remote.

Re: BEST USE of the IR Remote!!!
 

It's obvious to me that the expected four signals/actions are something like this:

1) Knock off the ball in the leftmost spot
2) Knock off the ball in the center spot
3) Knock off the ball in the rightmost spot
4) Just go!

Re: BEST USE of the IR Remote!!!
 

If those actions seem obvious to everyone else (they do to me), maybe the GDC wanted something completely different?

Re: BEST USE of the IR Remote!!!
 

we are treating each lane of the track as three lanes (as there are three places the ball could be on that lane) two of our buttons will be used to "change lanes" so we are always underneath our ball!!

Re: BEST USE of the IR Remote!!!
 

They seem obvious to me as well... but extremely hard to accomplish. Ah the joys of being the programmer.

Re: BEST USE of the IR Remote!!!
 

Agreed. That's what was clear to us and that's what we're planning to do.

Re: BEST USE of the IR Remote!!!
 

why cant you do this and it would be an extra 15 seconds of tele-operated basically:
button 1: move robot forwards
button 2: move robot in reverse
button 3: turn robot left
button 4: turn robot right

Re: BEST USE of the IR Remote!!!
 

It's quite obvious that would be the best way to use the remote...
But who knows there always could be a different/better way to use it?!?! :D

:yikes:

Re: BEST USE of the IR Remote!!!
 

You sure can, but why?
With the addition of a few IR/Ultrasound range sensors, a gyro and encoders and some code you can have a robot that will drive around the track fully auto, and just use your IR remote for telling it what ball to knock down.

Re: BEST USE of the IR Remote!!!
 

Allen,
I think that is exactly what Dave wants us to use the IR for. The intelligence is on the robot. We give it an action we want it to accomplish and the robot takes the action on it's own. If a team wants to use the IR as another form of remote operation they are going to have some hard problems to over come like the interference issues.

Re: BEST USE of the IR Remote!!!
 

What about

1. Drive Forward
2. Turn Left
3. Turn Right
4. Knock the trackball off.

for IR buttons

Re: BEST USE of the IR Remote!!!
 

thats what ive been thinking.
question: In the teleop-period ive been thinking the IR remote can be used to signal the drive team (ie. pressing one button will turn one OI light on, etc). Is it legal to have the four buttons have different actions in different periods of the game, or could I use an if-statement so in teleop the IR wont change any values, just turn on lights?

Re: BEST USE of the IR Remote!!!
 

<R69> The ROBOT shall not dynamically change the recognized command set during a MATCH.


Guys... READ the MANUAL!