Chief Delphi - shafts for wheelbearings

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)

- - shafts for wheelbearings (http://www.chiefdelphi.com/forums/showthread.php?t=61342)

mrt253

10-01-2008 21:59

shafts for wheelbearings

did anyone get these? or are we supposed to buy them separately?

Vikesrock

10-01-2008 23:44

Re: shafts for wheelbearings

You have to provide your own axle to mount the wheels on. The easiest solution would be bore out the kitbot holes and use Grade 8 1/2" bolts. There are already a couple other threads on here about this so you can take a look for more details on the other ideas (turning down shafts ect.)

ebarker

10-01-2008 23:49

Re: shafts for wheelbearings

We go to the hardware store and buy a length of 1/2 by 3/8 bore steel tubing and cut it to length as sleeves over the 3/8 bolts.

not so elegant but works.

All times are GMT -5. The time now is 08:00.