Chief Delphi - geer tooth sensor - how many will code support?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - geer tooth sensor - how many will code support? (http://www.chiefdelphi.com/forums/showthread.php?t=61347)

RedOctober45

10-01-2008 22:24

geer tooth sensor - how many will code support?

Using the gear tooth sensor, how many can encoder the code support? I am unsure how many external interrupts exist on this chip...

Alan Anderson

10-01-2008 23:21

Re: geer tooth sensor - how many will code support?

Quote:

Originally Posted by RedOctober45 (Post 674813)

Using the gear tooth sensor, how many can encoder the code support? I am unsure how many external interrupts exist on this chip...

There are six digital input pins which can interrupt the processor. Two of them are very easy to connect gear tooth sensors to and program for. The other four take a bit more complexity in software to use well.

RedOctober45

10-01-2008 23:38

Re: geer tooth sensor - how many will code support?

Ok, I understand, thanks!

tseres

13-01-2008 14:33

Re: geer tooth sensor - how many will code support?

to make things easier, use Kevin's encoder code (kevin.org/frc) and just modify the Phase-B out of it.

All times are GMT -5. The time now is 23:20.