Chief Delphi - more than 4 ir controls?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - more than 4 ir controls? (http://www.chiefdelphi.com/forums/showthread.php?t=61467)

Vanquish

12-01-2008 12:15

more than 4 ir controls?

Is it legal for us to set multiple actions to our remotes or is the limit 4? We were thinking of if you hit the button once, it does one thing, if you hit it again it stops whatever its doing, etc.

button 1: fwd, hit, stop, hit, rev, hit stop
button 2: right, hit, stop
button 3: left, hit, stop

EricH

12-01-2008 12:18

Re: more than 4 ir controls?

Quote:

Originally Posted by Vanquish (Post 676062)

What you have looks like a violation to me. (Button 1 is for sure--I'd call a dynamically changing command set.) There is a thread about Robocoach commands on here that goes through all this in detail.

MARS-CJ

12-01-2008 14:52

Re: more than 4 ir controls?

Sadly, it would be a violation of the rules.

Quote:

<R65> SIGNALING DEVICES shall be designed to communicate signals from the ROBOCOACH to the ROBOT. SIGNALING DEVICES are excluded from Rule <R64>. SIGNALING DEVICES shall:

...

- be able to switch between no more than four states or conditions (i.e. send no more than four messages)

- be operated through only a single input at any given time (e.g. may not be operated by depressing two buttons at one time)

- not use changes in signal states to encode or transmit larger messages (e.g. Morse code)

All times are GMT -5. The time now is 12:38.