![]() |
Pic: Team 935's nearly complete chassis
![]() Here's a little preview of our chassis for this year. Good Luck Everyone! :cool: http://www.team935.info |
Re: Pic: Team 935's nearly complete chassis
please don't tell me you fabricated that entire frame :yikes:
it looks awesome very nice, GL with the meca's |
Re: Pic: Team 935's nearly complete chassis
Beautiful indeed.
|
Re: Pic: Team 935's nearly complete chassis
Is it just me or does it look like that no matter what way you put it down that the wheels don't touch or that the chassis will be very, very low
|
Re: Pic: Team 935's nearly complete chassis
Im pretty sure if you just put that on the field, had all your drive team have slightly annoyed looks on their face, maybe so red lights, you could win by sheer intimidation.
awesome job on the frame guys, wish ours looked that good. |
Re: Pic: Team 935's nearly complete chassis
That looks awesome. we were going to use mecanum wheels, but that was ruled out. our frame is probably 80/20 again.
|
Re: Pic: Team 935's nearly complete chassis
As well as being fabricated within a week, the chassis is very low, and touches the ground. Thanks for the positive feedback. :cool:
|
Re: Pic: Team 935's nearly complete chassis
Quote:
i tried to get a drive base as low as possible until someone told me that and i went, oh no. |
Re: Pic: Team 935's nearly complete chassis
We have the same height we used last year, but we ended up cutting off the front / back corners so we could climb ramps. Right now, we're about 7/8" off the ground.
|
Re: Pic: Team 935's nearly complete chassis
from the look of things you might......... want to downsize it a bit.
|
Re: Pic: Team 935's nearly complete chassis
Quote:
![]() And the wheels... ![]() Again, feedback is good. |
Re: Pic: Team 935's nearly complete chassis
Quote:
Quote:
|
Re: Pic: Team 935's nearly complete chassis
How much does it weigh?
|
Re: Pic: Team 935's nearly complete chassis
Thanks for the replies. Our chassis is 7/8" off of the ground and our CIM are 9/16" off the ground. I am not sure who was logged on to our railerobotics account but the statement about it being 1/4" off the ground is incorrect. Even with 9/16" we're cutting it close. Some how our team missed that part of the rules so I really appreciate the feed back.
We have not yet weighed the frame. I'll report back when we do. |
Re: Pic: Team 935's nearly complete chassis
#25 chains and no tensioners? How does that work?
|
| All times are GMT -5. The time now is 19:48. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi