Chief Delphi - LINKING ERRORS!!!

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - LINKING ERRORS!!! (http://www.chiefdelphi.com/forums/showthread.php?t=61680)

AHepperla

14-01-2008 21:17

LINKING ERRORS!!!

Hey guys, when we compile our code in EasyC, we get a linking error and the error says: Error- section '.code_u2open.o' can not fit the section. Section '.code_u2open.o' length=0x00000064. We're dividing with floats and that seems to be the problem because it works with ints. Any ideas???

Mark McLeod

14-01-2008 23:22

Re: LINKING ERRORS!!!

You've run out of Program Memory on the controller.

JonathanLKS

15-01-2008 18:46

Re: LINKING ERRORS!!!

If you need those decimals, you could just scale them up by a few factors of ten so you can use ints, divide, then scale it back down.

It'll be faster too.

Kevin Sevcik

15-01-2008 23:36

Re: LINKING ERRORS!!!

Quote:

Originally Posted by JonathanLKS (Post 678736)

If you need those decimals, you could just scale them up by a few factors of ten so you can use ints, divide, then scale it back down.

It'll be faster too.

Scale up by factors of 2. Then you can use << instead of *. It's a heck of a lot quicker. You still have to divide unless you're using unsigned ints, however.

AHepperla

19-01-2008 10:00

Re: LINKING ERRORS!!!

Alright thanks guys, helped a lot and we're back on track now!!!

All times are GMT -5. The time now is 18:05.