Chief Delphi - Pneumatics Part # restrictions

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)

- - Pneumatics Part # restrictions (http://www.chiefdelphi.com/forums/showthread.php?t=61951)

nvanderlugt

02-02-2008 15:20

Re: Pneumatics Part # restrictions

What about 3 position Bimba cylinders, custom ordered?
There is no mention of not using 3 position cylinders.
R89 states: Any additional air cyl must source from Bimba or Parker, or recovered from prior year First Kit of Parts. Any!!
Ours are 2" Bore 12" stroke, 9" then 3" more for three positions....

Anyone?

Thanks,

Nick v.

EricH

02-02-2008 17:30

Re: Pneumatics Part # restrictions

Quote:

Originally Posted by nvanderlugt (Post 690799)

Is it on the order sheet? If it isn't, don't even think of it. Or else petition FIRST to make them legal next year.

jgannon

02-02-2008 18:09

Re: Pneumatics Part # restrictions

Quote:

Originally Posted by nvanderlugt (Post 690799)

What about 3 position Bimba cylinders, custom ordered?

Eric is right. Take a look at the sentence immediately before the one you quoted.

Quote:

Originally Posted by R89

All cylinders, regardless of source, must be identical to those listed on the Free Pneumatic Components Order Form (e.g. same part numbers)

This is completely unambiguous, and has been reinforced by countless Q&A responses.

All times are GMT -5. The time now is 06:56.

Page 2 of 2

Show 100 post(s) from this thread on one page