Chief Delphi - pic: Wiring

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Wiring (http://www.chiefdelphi.com/forums/showthread.php?t=61961)

Matth3w

18-01-2008 13:17

pic: Wiring

loading photo ...

laultima

18-01-2008 13:19

Re: pic: Wiring

I would probably avoid wood for a base unless you have something under each component, I think we used plexy. We had screwed a bunch of stuff onto wood to make a test board to mess around with, and after awhile it started to smoke.:D

EricH

18-01-2008 13:21

Re: pic: Wiring

Quote:

Originally Posted by laultima (Post 680832)

Wood is fine, as long as you don't try to run current through it. 330 has used wood for I don't know how long (5 years minimum) without an issue. We even hogged out the base last year and it held up to everything we could throw at it.

T3_1565

18-01-2008 22:15

Re: pic: Wiring

are the fans able to be wired like that?? that would save some trouble for sure!

EricH

18-01-2008 22:16

Re: pic: Wiring

Quote:

Originally Posted by T3_1565 (Post 681167)

are the fans able to be wired like that?? that would save some trouble for sure!

Far as I know, it isn't disallowed.

beemgruem

18-01-2008 22:20

Re: pic: Wiring

Yeah, the wires are allowed. In its website if you see wiring it shows like that. And its so good to wire it like that. We did and there is no problem..

Also we are using wood board, we are driving it 1.5 week, so there is no problem with using wood.

lukevanoort

18-01-2008 22:21

Re: pic: Wiring

Quote:

Originally Posted by EricH (Post 681168)

Far as I know, it isn't disallowed.

While I have had an inspector get on our case about wiring fans to the Victor inputs, that was only one guy and I have doubts about his competence. The IFI user's guide to the Victor says to wire it this way, so that's how we usually do it.

All times are GMT -5. The time now is 13:34.