Chief Delphi - 80 inches

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - 80 inches (http://www.chiefdelphi.com/forums/showthread.php?t=62041)

Pneumaticsman

19-01-2008 11:55

80 inches

In the 80 inch rule, does the ball have to be included in that 80 inches as well, or not since it is the game piece?:confused: \

Thanks

AdamC

19-01-2008 12:05

Re: 80 inches

The ball does not count towards the 80" limit.

Pneumaticsman

19-01-2008 12:13

Re: 80 inches

so then, if our robot itself can go past 80 inches, but we don't, are we disqualified?

Thanks:confused:

Vikesrock

19-01-2008 12:26

Re: 80 inches

The 80" rule is enforced on the field in the "Playing Configuration". This means that as long as your robot does not exceed a maximum 80" horizontal measurement while playing the game you will not receive a penalty. Also, unless you frequently violate this rule you wouldn't be disqualified you would only receive a 10 pt. penalty.

Quote:

<R16> Once the MATCH has started, the ROBOT may assume a PLAYING CONFIGURATION that
exceeds the size dimensions specified in Rule <R11>. While in the PLAYING
CONFIGURATION, the ROBOT may expand up to a maximum horizontal dimension of 80
inches (e.g. all parts of the ROBOT must fit within an imaginary 80-inch-diameter upright
cylinder). There are no height limits for a ROBOT in its PLAYING CONFIGURATION at any
time after the start of the MATCH.

And remember the 80" cylinder is an example not part of the rule itself.

usbcd36

19-01-2008 16:33

Re: 80 inches

Why would they "e.g." instead of "i.e."?

"e.g." means "For example…"; "i.e." means "meaning…".

Am I missing something here?

GaryVoshol

19-01-2008 18:05

Re: 80 inches

Quote:

Originally Posted by usbcd36 (Post 681676)

Why would they "e.g." instead of "i.e."?

"e.g." means "For example…"; "i.e." means "meaning…".

Am I missing something here?

Because it is an example, not the literal meaning of the rule. This was explained in one of the updates - #3? Someone in one of the other threads regarding <R16> noted that an equalterial triangle with 80" sides would not fit in an 80" circle.

Richard McClellan

20-01-2008 00:01

Re: 80 inches

Everyone should read this regarding the 80" rule:

http://forums.usfirst.org/showthread.php?t=8159

This was definitely different than my initial interpretation when I read the rule.

All times are GMT -5. The time now is 05:19.