Chief Delphi - 9 pin cable from radio to RC

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - 9 pin cable from radio to RC (http://www.chiefdelphi.com/forums/showthread.php?t=62381)

sparrowkc

23-01-2008 20:02

9 pin cable from radio to RC

Do I have to use the supplied cable, or can I make my own shorter more flexible cable out of flat cable?

<R67> ...and 9-pin cables shall not be tampered with, modified, or adjusted in any way.

<R71> Ribbon cable ... may be used to connect signal lines to the 9 pin ports on the Robot Controller.

The space I have to mount the RC in is kind of funky, and If I have to use the bulky supplied cable, our RC is going to have to be mounted vertically or something...

dlavery

23-01-2008 21:03

Re: 9 pin cable from radio to RC

You will probably want to check out this Q&A system answer, which addresses how the radio modem must be connected to the RC.

-dave

All times are GMT -5. The time now is 05:38.