Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   2200 Is now Driving!! (http://www.chiefdelphi.com/forums/showthread.php?t=62443)

dan2200 24-01-2008 21:15

2200 Is now Driving!!
 
Well After a long day we are driving around and pretty fast! Check out this video of our robot!

http://www.youtube.com/watch?v=BXtsBmVw2w0

Bochek 24-01-2008 21:17

Re: 2200 Is now Driving!!
 
sorry about the bad quality, I will get a better quality video tomorow.

- Bochek

Jaybee1405 24-01-2008 21:45

Re: 2200 Is now Driving!!
 
omni's? caster's?

dan2200 26-01-2008 18:10

Re: 2200 Is now Driving!!
 
Well This is a much better quality vid and it has reg wheels and omnis, two of each.

Check out the better Vid: http://www.youtube.com/watch?v=1hClsFjzJ9k&eurl

Scott Carpman 26-01-2008 18:22

Re: 2200 Is now Driving!!
 
Nice job guys, especially since I see you've got your hybrid working.

DonRotolo 26-01-2008 22:37

Re: 2200 Is now Driving!!
 
Very nice, and glad to see you practicing on carpet.

That second video made me laugh out loud: A huge room with a small cardboard box in it, and the robot hits the box...

Was that hybrid, or driver-controlled?

Bochek 27-01-2008 00:52

Re: 2200 Is now Driving!!
 
that was driver controlled, we had the joysticks backwards (facing away from you) as we where trying to drive the robot backwards. That tends to get a little confusing.

- Bochek

Wayne Doenges 27-01-2008 06:41

Re: 2200 Is now Driving!!
 
Are you using the new AndyMArk wheels?
If so, how was the traction?
The new ones do not seem to be as tacky as last years.
Kewl bot.

Zultraranger 27-01-2008 08:41

Re: 2200 Is now Driving!!
 
good job, but horrible vid quality.

galewind 27-01-2008 09:48

Re: 2200 Is now Driving!!
 
are those sonic range finders behind those diagonal plates?

Gamer930 27-01-2008 10:03

Re: 2200 Is now Driving!!
 
Quote:

Originally Posted by Wayne Doenges (Post 686618)
Are you using the new AndyMArk wheels?
If so, how was the traction?

The new AndyMark wheels have really good traction on carpet. If you try them on tile floor they slip some

basicxman 27-01-2008 10:08

Re: 2200 Is now Driving!!
 
really fast! i'm in burlington too! i run an FTC team, need a vex demo? :D

BTW, do any of you know my twin brothers the horsmans? they go to m.m.

Bochek 27-01-2008 16:57

Re: 2200 Is now Driving!!
 
No, no fancy sensors here... not yet anyways ;)

I will have to get some pictures, but if you look closely at the very end of the second video, you can see some little details, like the 6 Cat5e connectors ?!?


Yes we are using the new KOP wheels, and so far I can't say if they are slicker then last year or not... not enough driving time to wear them in yet.

But the Omni's sure are sticky, and bite very well.

Tomorrow we are doing some testing of 1 joystick drive configuration.

- Bochek

,4lex S. 30-01-2008 09:25

Re: 2200 Is now Driving!!
 
That is one fast robot...
By the way, are you working with Omni's on front and KOP wheels on back? I could not quite make it out. If you can control that thing, you will probably be a force to be reckoned with at Waterloo. Good luck!

MiniNerd24 30-01-2008 11:38

Re: 2200 Is now Driving!!
 
:ahh: That's our robot!!! :ahh:
Nice driving by the way.


All times are GMT -5. The time now is 19:28.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi