pic: 1848 finished base
 

Re: pic: 1848 finished base
 

Are the center wheels rubbing against the Toughbox brackets?

Re: pic: 1848 finished base
 

might make it turn better, did you try it?

Re: pic: 1848 finished base
 

With the fullsize pic HERE, it doesn't look like it.
It may when it gets pushed around and starts to "take a beating" though.

Nothing a simple notch into the support plate couldn't remedy.

Re: pic: 1848 finished base
 

Is your mounting plate a sheet of aluminum that you drilled or was it purchased?

Re: pic: 1848 finished base
 

no, the center wheels don't touch the brackets

thats actually silver pegboard.

Re: pic: 1848 finished base
 

you've got the negative running out of the power switch and your not using the power dis. block

Re: pic: 1848 finished base
 

if that's not what your talking about, you may want to look at the diagram that's in the FIRST manual, because jason701802 is right.

Re: pic: 1848 finished base
 

A slight flaw in your wiring. :P Refer to the eletrical wiring diagram in the manual. (I have no idea which manual, hence why I don't have a link :) ) Drive train looks good though (no shortage of power :P ). Good luck!

Re: pic: 1848 finished base
 

i can't beleive no ones gotten it yet, look at the 2 froint wheels

Re: pic: 1848 finished base
 

well now that it has been mentioned it looks like the two front wheels aren't in the same spot on the pegboard lol.. the left (left in the picture) wheel is closer to the fron than the right one.

Re: pic: 1848 finished base
 

The chain on the left side appears to be dragging on the ground... looks like the chain was too long!

Is that what you were having us look for?

Re: pic: 1848 finished base
 

You are missing your flux capacitor. you need to remember these things (=

Re: pic: 1848 finished base
 

... and it looks like the axles for the wheels aren't in the same places on each side. Looks like you'll be moving one of them.

Re: pic: 1848 finished base
 

Your axles aren't aligned! :p