Trackball Spacing
 

Can anyone tell me what is the spacing between the bars where the trackballs are place? in the manual it says 32" from center to center but that doesnt make sense. Any ideas?

Re: Trackball Spacing
 

http://www2.usfirst.org/2008comp/Dra...8_Field_GS.pdf

The drawings say 32". It's 32".

Re: Trackball Spacing
 

why doesn't that make sense?

the square that holds each trackball is made of tubes, the side of the square is 32".

the distance between trackballs is different, and I can not remember it of the top of my head.

-Leav

Re: Trackball Spacing
 

Sure it makes sense, but only if you understand what they are saying...and center-to-center measurements are common in many engineering fields.

The distance between the pipes is just the center-to-center distance, minus the diameter of the pipe (or, minus two times half the diameter of the pipe, which is the same thing)

With 1.5" outside diameter pipe, and 32" center-to-center spacing, the distance between the bars is 30.5"

Re: Trackball Spacing
 

thank you squirrel that helped alot!:D