Re: pic: Rotary Encoder Mount
Quote:
Originally Posted by Stephen Kowski
(Post 685777)
do you have a model of this or some photos of this broken out? Seems very interesting I'd love to know more....
|
I would, too. :) I wasn't responsible for this; it just appeared after we'd asked one of our mentors to take the lead in mounting the encoders. He likes his laser cutter.
This would've been designed in Microsoft Visio. I can try to get a look at the drawings some time this week and maybe even recreate the parts in Solidworks -- but it'll be, necessarily, a low priority.
Quote:
Originally Posted by billbo911
(Post 685786)
Now that is a work of art!
Does the chain engage the sprocket on top and bottom?
|
Quote:
Originally Posted by Hell918
(Post 685820)
Nice is the sprocket engaged just in one spot or in two?...Is there a cutout view of the sprocket?
|
It's an 18 tooth sprocket that engages at both the top and bottom.
Quote:
Originally Posted by Lil' Lavery
(Post 685858)
While this solution is very cool, why not just mount the encoder a more traditional (ie simpler) way?
|
Quote:
Originally Posted by rachal
(Post 686031)
Wooo, completely unnecessary and absolutely beautiful. Why'd you decide to do them this way?
|
This is a pretty simple method, all things considered, since we have the laser cutter to work with. Manufacturing time might have been as long as five minutes. Development probably took as much as thirty minutes. "Traditional" methods would've involved manufacturing and adding a hard point to the chassis to fix the encoders in place and devising a system of gearing that connects to the existing drive components. Comparatively, this was a walk in the park. |
