Chief Delphi - EASYC PRO HELP rookie programmer here

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - EASYC PRO HELP rookie programmer here (http://www.chiefdelphi.com/forums/showthread.php?t=62585)

Re: EASYC PRO HELP rookie programmer here

Quote:

Originally Posted by mayazk (Post 689339)

in airplane drive one of the joysticks move left and right rather than both going back and forward!

so how do i program that!

Use arcade mode, choosing the Y axis of the "speed" joystick and the X axis of the "steer" joystick.

Re: EASYC PRO HELP rookie programmer here

so the arcade motor stands for what?
y axis = speed and x=steer got it!

TODAYS STEPS
TODAY WE HHOKED UP 4 VICTORS AND 1 VICTOR TO A MOTOR NOW THE MOTOR WAS CONNECTED TO A ROD WHICH WAS HOOKED WITH ANOTHER MOTOR THE ROD WILL ACT LIKE A PULLEY SYSTEM

NOW WHAT I WANT TO KNOW IS

IS THERE ANYWAY THAT I CAN INCREASE THE SPEED OF THE MOTOR AND IF SO WHAT IS IT?

ALSO I WANT TO LEARN MORE ABOUT THE AUTONOMUS MODE AND HOW TO SET IT UP??

I WANT OUR ROBOT TO GO STRAIGHT 13 AND A HALF FEET LIFT ITS CLAW AND WERE GOING TO INCLUDE A LIMIT SWITCH A LITTLE BIT MORE LIGHT ON THAT SUBJECT WOULD BE KIND!

THATS ALL FOR NOW FOLKS AND I KNOW IM BEING BOSSY BUT IT WOULD HELP ALOT IF I GOT QUICK REPLIES ILL BE POSTING EVERY TUESDAY,WEDNESDAY,FRIDAY AND SATURDAY BECAUSE OF THE SHORT TIME IT WOULD BE A GREAT HELP IF YOU GAVE SOME QUIICK REPLIES

THANKS ALOT FOR UR HELP!!!!

Re: EASYC PRO HELP rookie programmer here

so like the controls in halo one thats up and down for speed and one thats left and right for turning