Chief Delphi - Remote board

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Remote board (http://www.chiefdelphi.com/forums/showthread.php?t=62614)

Mike.Allen

27-01-2008 14:40

Remote board

Can anyone give me a diagram to hook up the IR sensor to the RC board?

Mike.Allen

31-01-2008 15:02

Re: Remote board

Can anyone help us?

Al Skierkiewicz

31-01-2008 15:09

Re: Remote board

Mike,
Full instructions on use and installation and the schematic are on the FIRST website in the additional documentation link under Section 8, I believe.

Mike.Allen

31-01-2008 15:24

Re: Remote board

I don't see it. I see a description for the board but not instructions beyond that video that really didn't show the wiring very well

Al Skierkiewicz

31-01-2008 15:33

Re: Remote board

http://www.usfirst.org/community/frc...nt.aspx?id=482 for IR board video and schematic.

DanDon

31-01-2008 15:34

Re: Remote board

Quote:

Originally Posted by Mike.Allen (Post 689596)

I don't see it. I see a description for the board but not instructions beyond that video that really didn't show the wiring very well

The FIRST documentation gives you the pinout of the IR board. One or both of the ground and one or both of the Vcc pins get connected to your ground and supply voltage source respectively. The other pins would get connected to PWM cables going to your digital inputs. All other needed information is in the FIRST documentation.

All times are GMT -5. The time now is 12:42.