Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   PSA: Banebots as replacement for FP motor (http://www.chiefdelphi.com/forums/showthread.php?t=62662)

AdamHeard 28-01-2008 03:59

PSA: Banebots as replacement for FP motor
 
Being worried about breaking our FPs early with no spares, I looked into the motors that came with our 64:1 gearboxes some more. The same 550 that came in the kit. They are not an exact match, but are very similar to the FP in terms of performance.

For now, we will run our arm with two 550s and swap for FPs later.

So, at a regional and need to replace a burned out FP? A 550 will do the trick. you could even run a 550 paired with a FP (not the best match, but it will do) in a pinch to replace a dual FP setup.

With the lack of FP spares readily available, this could save a lot of teams in a pinch. I know I'll make 973 bring all our 550 (we have 5-6) motors to our regionals for teams to use.

Andrew Schuetze 28-01-2008 07:28

Re: PSA: Banebots as replacement for FP motor
 
Quote:

Originally Posted by AdamHeard (Post 687150)
Being worried about breaking our FPs early with no spares, I looked into the motors that came with our 64:1 gearboxes some more. The same 550 that came in the kit. They are not an exact match, but are very similar to the FP in terms of performance.

For now, we will run our arm with two 550s and swap for FPs later.

I like all of your reasoning and especially your GP offer for spares. I don't want any teams who read this note to get the impression that you can use two BB 550 motors on their robot. The KOP only included a single BB 550 motor:eek: The second BB motor is the 540. So as you suggest, the BB 550 might be able to substitute for a FP motor that breaks in competition and only if you are not already using it on your robot for another mechanism.:)

APS

EricH 28-01-2008 12:15

Re: PSA: Banebots as replacement for FP motor
 
Hey, Adam, don't forget the Spare Parts booth! They should have FPs, gearboxes and all. (And how long does it take to remove an FP from its gearbox?)

Andy L 28-01-2008 13:30

Re: PSA: Banebots as replacement for FP motor
 
if I remember correctly I read somewhere I think the most recent team updaelte said ifi will stock FPs soon. I'm on my phone so I can't check but I'll look as soon as I can.

I just checked team update 5 and it says first is working with FP to get some spares at IFI

114Klutz 28-01-2008 18:44

Re: PSA: Banebots as replacement for FP motor
 
You're only allowed to use a single Banebots RS550. Only one is provided - and it isn't in the list of additionally allowed motors.

AdamHeard 28-01-2008 19:04

Re: PSA: Banebots as replacement for FP motor
 
Quote:

Originally Posted by 114Klutz (Post 687546)
You're only allowed to use a single Banebots RS550. Only one is provided - and it isn't in the list of additionally allowed motors.

Yes, I'm well aware of that. I think a majority of teams will not be using two FPs and a 550. this is to help the teams in that situation.

If are are referring to 973 running two 550's for now, that is to keep our FPs nice and new; we won't run during the season like that.

Andy L 29-01-2008 13:48

Re: PSA: Banebots as replacement for FP motor
 
Still pointing to Team Update 5 IFI should be selling FPs within the week


All times are GMT -5. The time now is 02:30.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi