Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)
-   -   Overpass question. [HELP] (http://www.chiefdelphi.com/forums/showthread.php?t=62712)

otomerobot 28-01-2008 15:52

Overpass question. [HELP]
 
This is probably already a thread so sorry.

Our team is trying to figure out how tall is the overpass from the floor to the top of the pipe. Where the ball sits.

Since the pipe is an inch in a half thick is it six in a half feet from the bottom of that pipe or the top.

It would be great help, thanks!.

:)

dlavery 28-01-2008 16:14

Re: Overpass question. [HELP]
 
Check out this answer in the FIRST Q&A system.

-dave


.

GaryVoshol 28-01-2008 16:14

Re: Overpass question. [HELP]
 
Search is your friend. It's been answered both here on CD

http://www.chiefdelphi.com/forums/sh...light=overpass

and on FIRST Q&A.

6.5 feet to the top of the pipe.

Bob Steele 28-01-2008 16:15

Re: Overpass question. [HELP]
 
top

otomerobot 28-01-2008 16:25

Re: Overpass question. [HELP]
 
Thank you very much. :D

Jon Stratis 28-01-2008 16:33

Re: Overpass question. [HELP]
 
Take a look at the 2008 Game Specific Drawings from FIRST, available here:
http://www.usfirst.org/community/frc...t.aspx?id=7684

Specifically, you want to know the dimensions of pieces 06 and 07, which is the end piece that supports the overpass, and is described in diagrams W5 and W6.

W6 specifies a height of 76 3/8" from the bottom of the overpass connector to the bottom of the piece. This translates into 6' 4 3/8".

W5 describes the footing for the piece, which (if i'm reading it right) says the thickness of the floorplate is 1/8".

And as you've said, the pipe is 1 1/2" OD.

Add all those together, and you get 6 1/2' from the floor to the very top of the pipe that supports the ball. I would allow for some slight variation in your design, however - maybe give or take an inch.

EricH 28-01-2008 17:10

Re: Overpass question. [HELP]
 
Quote:

Originally Posted by eagle33199 (Post 687443)
Add all those together, and you get 6 1/2' from the floor to the very top of the pipe that supports the ball. I would allow for some slight variation in your design, however - maybe give or take an inch.

Official word (in Section 6) is the variation (caused by different setup crews) is up to 1/4". They design the fields to go together the same way every time, so I'd take their word for it.

dlavery 28-01-2008 17:15

Re: Overpass question. [HELP]
 
.. and now that we have answered this question five times over with the very same answer, can this thread please stop unless someone has some NEW information to add?





.

Elgin Clock 28-01-2008 17:18

Re: Overpass question. [HELP]
 
Quote:

Originally Posted by dlavery (Post 687479)
.. and now that we have answered this question five times over with the very same answer, can this thread please stop unless someone has some NEW information to add?





.

You have 2377 posts with that post I quoted..
That's new information, and interesting to myself at least.. :D


All times are GMT -5. The time now is 05:45.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi