Chief Delphi - Using 2 motors in one toughbox

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - Using 2 motors in one toughbox (http://www.chiefdelphi.com/forums/showthread.php?t=62724)

DarKCroNo

28-01-2008 16:59

Using 2 motors in one toughbox

Our team has put together 2 CIM motors into the andymark toughbox, what we're wondering is if we should be connecting them both to 1 victor or 2?

gurellia53

28-01-2008 17:02

Re: Using 2 motors in one toughbox

Quote:

Originally Posted by DarKCroNo (Post 687465)

Our team has put together 2 CIM motors into the andymark toughbox, what we're wondering is if we should be connecting them both to 1 victor or 2?

The rules state that you need 1 victor per CIM

thefro526

28-01-2008 17:03

Re: Using 2 motors in one toughbox

Each one has to be driven through it's own victor. so you'll need 2 speed controllers for each two motor transmission

DarKCroNo

28-01-2008 17:12

Re: Using 2 motors in one toughbox

oh okay thanks alot guys!

jskene

29-01-2008 09:09

Re: Using 2 motors in one toughbox

You can use a "Y" PWM cable to drive both Victors from the same PWM port on your Robot Controller.

All times are GMT -5. The time now is 05:01.