Chief Delphi - Easy C problem

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Easy C problem (http://www.chiefdelphi.com/forums/showthread.php?t=62774)

Sparticusrobo08

29-01-2008 11:37

Easy C problem

I did like the instructions said for the initial setup for easyC but when i went to download the On-line Window to download the On-line code a window popped up and said that the Program light should be orange and the serial cable should be connected all of this was done so where did I go wrong? And what should i do to fix it?

mluckham

29-01-2008 23:23

Re: Easy C problem

Are you using the right COM port number?

lasereyes

29-01-2008 23:53

Re: Easy C problem

Did you press the PROG button on the controller until 2 of the 5 lights went orange?

BanksKid

30-01-2008 08:19

Re: Easy C problem

well there's your problem your using Easy C. but seriously you might consider calling intellitech if they'r still the ones who make it.

All times are GMT -5. The time now is 23:48.