ToothGear Sensor
 

Hello
We tried to work with the toothgear sensor, but it keeps sending us only the signal "1"...
We only wrote a "printf()" command for the toothgear value, and we tried to put it in both user_routines.c and user_routines_fast.c and still it's either always "1" or when we unplug the sensor it sends "0" and after being near a metallic object, it turns to "1" and stays that way.

Can anyone help us?

Proggraming Team
Steampunk 1577
Israel

Re: ToothGear Sensor
 

Is this the KOP geartooth sensor? Measure the voltage coming off the sensor output (white) and see if it is ~2.68 volts. If it is about that voltage, make sure you do the resistor modification as described in several threads on the subject (use search...I don't know the threads offhand) and it should be fixed.