Chief Delphi - pic: 114 Custom Wheels

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: 114 Custom Wheels (http://www.chiefdelphi.com/forums/showthread.php?t=63012)

CraigHickman

31-01-2008 22:35

pic: 114 Custom Wheels

Cory	31-01-2008 22:36

Re: pic: 114 Custom Wheels

The one with the plain bore, because it'll be hex broached.

CraigHickman

31-01-2008 23:12

Re: pic: 114 Custom Wheels

Quote:

Originally Posted by Cory (Post 689910)

The one with the plain bore, because it'll be hex broached.

Oof, I wish. I had it all designed around hex, but my team decided I should change it back to the normal Keyway, so we didn't have to buy a broach... That wheel just hasn't been broached yet.

sanddrag

01-02-2008 00:17

Re: pic: 114 Custom Wheels

The one with the plain bore because it has stress reducing radii.

114Klutz

01-02-2008 00:35

Re: pic: 114 Custom Wheels

Now that was quick.

CraigHickman

01-02-2008 00:38

Re: pic: 114 Custom Wheels

Quote:

Originally Posted by sanddrag (Post 689985)

The one with the plain bore because it has stress reducing radii.

Exactly. We were going to have the wheels done exactly the way they were done last season, but our CNC guy suggested the radii, and I couldn't refuse...

Cory	01-02-2008 00:55

Re: pic: 114 Custom Wheels

Quote:

Originally Posted by 114ManualLabor (Post 690004)

Exactly. We were going to have the wheels done exactly the way they were done last season, but our CNC guy suggested the radii, and I couldn't refuse...

What kind of machinist goes and gives himself more work by putting radii on things? ;)

I prefer to remove unnecessary radii to make my life easier when it comes to machining parts.

edi: my bad. Im talking about something else than you guys.

CraigHickman

01-02-2008 01:01

Re: pic: 114 Custom Wheels

Quote:

Originally Posted by Cory (Post 690014)

Ah. Well, Perry is a bit of a nut... But he does AMAZING work, so I won't complain. He was even going to engrave our team number into each spoke, but I talked him out of it to save him some time...

All times are GMT -5. The time now is 07:08.