Chief Delphi - Player Station Measurements

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - Player Station Measurements (http://www.chiefdelphi.com/forums/showthread.php?t=63089)

leobot_792

02-02-2008 10:01

Player Station Measurements

We've been checking the manual all over and can't find the required measurements for the robot control carrier that goes in the player's station. It would be very helpful if someone could clear it up for us. Thanks :)

MrForbes

02-02-2008 10:12

Re: Player Station Measurements

Did you find the measurements for the shelf that it must sit on? That is the only real requirement...it has to fit on the shelf. From memory, the shelf is 4 feet wide and one foot deep, and has a strip of velcro running down the center for your console to stick to.

Andy L

02-02-2008 23:47

Re: Player Station Measurements

Quote:

Originally Posted by squirrel (Post 690627)

and has a strip of velcro running down the center for your console to stick to.

I looked through the rules and things but I couldn't fidn where it says what side of the velcro is on the shelf. does anyone know?

EricH

02-02-2008 23:54

Re: Player Station Measurements

Quote:

Originally Posted by Andy L (Post 691153)

I looked through the rules and things but I couldn't fidn where it says what side of the velcro is on the shelf. does anyone know?

Section 6.4.2 says it's loop side.

Oh, and Squirrel: it's 5' (60") wide. The Velcro is 4.5' x 2".

All times are GMT -5. The time now is 05:47.