Chief Delphi - Ir board problems

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)

- - Ir board problems (http://www.chiefdelphi.com/forums/showthread.php?t=63123)

SidneySalvo

02-02-2008 15:19

Ir board problems

Ok, so here is our problem, we have the IR board hooked up to a power source (12v battery) and we have check that the voltage is making it to the board, but none of the lights are turning on. We have been pressing the button that is supposed to make it work but it doesn't change anything. Does the board need to be hooked up to anything other than the power source to work and train, or is there some other problem i don't know about yet?

JohnC

05-02-2008 00:15

Re: Ir board problems

I hate to ask, but you have it connected to ground as well, right?

Miner

05-02-2008 09:24

Re: Ir board problems

I you can download the kickoff movie; at 54 minutes into the movie, the two guys come on and talk about the IR board. It really helped us when we looked at the clip. Try it. Good luck!

Jacob

RyanN

05-02-2008 10:22

Re: Ir board problems

Do you mean this video?

Miner

05-02-2008 10:29

Re: Ir board problems

Quote:

Do you mean this video?

Yes that would be it. Thanks

All times are GMT -5. The time now is 02:38.