Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   816's Robot as of 2/2/08 (http://www.chiefdelphi.com/forums/showthread.php?t=63143)

thefro526 02-02-2008 19:47

816's Robot as of 2/2/08
 




Yeah were almost done just need to mount the bumpers, re-drill the hole on our van door motor for th elevator and mount some lexan.

DarkFlame145 02-02-2008 20:15

Re: 816's Robot as of 2/2/08
 
nice and simple, can you guys knock off the ball?

thefro526 02-02-2008 22:41

Re: 816's Robot as of 2/2/08
 
yeah we actually can either knock it off with the forks on the elevator or we drive under the overpass and put the elevator up and just push the ball off the top.

s_forbes 02-02-2008 22:45

Re: 816's Robot as of 2/2/08
 
I like the tennis balls! We need some sort of plugs for the end of our picker-upper, and this thought never occured to me.

Looks like a nice reliable design. How quickly can you move the ball over the overpass?

thefro526 02-02-2008 23:06

Re: 816's Robot as of 2/2/08
 
I like the tennis balls too, A mentor on our team ordered some orange and blue balls from a school supplier. It takes about 10-12 seconds to move the ball up and about 20-30 seconds for a full hurdle. I might get some video up in the coming week maybe late monday or tuesday.

thefro526 03-02-2008 00:10

Re: 816's Robot as of 2/2/08
 
Some more specs:

2 Cims through the KOP gearbox
25:22 reduction
6" Wheels
~10FPS

Chain Powered Lift
Van Door Motor with a 1:1 Ratio

jgannon 03-02-2008 00:36

Re: 816's Robot as of 2/2/08
 
Very nice gripper and elevator. I get this weird feeling, though, that an abrupt stop or a bump from behind when you're in the configuration in the first picture would send you over... does it feel tippy at all? Also, what's your distance from left tennis ball to rear right corner right now?

CCCP 03-02-2008 01:16

Re: 816's Robot as of 2/2/08
 
very nice bot you got there

Dolan 03-02-2008 02:11

Re: 816's Robot as of 2/2/08
 
my team had an idea like this one but we did not do but i wish we did

thefro526 03-02-2008 02:21

Re: 816's Robot as of 2/2/08
 
Quote:

Very nice gripper and elevator. I get this weird feeling, though, that an abrupt stop or a bump from behind when you're in the configuration in the first picture would send you over... does it feel tippy at all? Also, what's your distance from left tennis ball to rear right corner right now?
It's a bit tippy all the way up but only at high speeds which it wont be driven at. We also have a few pounds to spare and we may add up to 4 pounds of steel/lead weights down low and then 15 pounds of bumpers. From either tennis ball the the opposite rear is about 72-73 inches which is far under the 80 inch rule

chinckley 03-02-2008 12:26

Re: 816's Robot as of 2/2/08
 
How are you hoisting your uprights? Are you using chain? If so, how are you doing it? Any pics available? We are having difficulties with ours and we can sure use some help. Yours sure looks wonderful.:) We have looked at webbing, cable, chain. We are not sure how to proceed.:confused:

Carolyn Hinckley

Kevin Sevcik 03-02-2008 12:54

Re: 816's Robot as of 2/2/08
 
Quote:

Originally Posted by thefro526 (Post 691099)
I like the tennis balls too, A mentor on our team ordered some orange and blue balls from a school supplier. It takes about 10-12 seconds to move the ball up and about 20-30 seconds for a full hurdle. I might get some video up in the coming week maybe late monday or tuesday.

Quote:

Originally Posted by thefro526 (Post 691181)
Some more specs:

2 Cims through the KOP gearbox
25:22 reduction
6" Wheels
~10FPS

Chain Powered Lift
Van Door Motor with a 1:1 Ratio

A respectful suggestion since you still have 2-ish weeks left. That's a really really long lift time, and the van door motors are rather low power. Why don't you look into using an extra CIM motor through a dewalt transmission as detailed in the Nothing but Dewalts whitepaper. If you need the hard to backdrive properties of the van door, you can always leave the anti-backdrive pins in the edwalt transmission. With proper gearing you could probably get your lift time down to 3-4 seconds.

chinckley 03-02-2008 13:29

Re: 816's Robot as of 2/2/08
 
Quote:

Originally Posted by Kevin Sevcik (Post 691374)
A respectful suggestion since you still have 2-ish weeks left. That's a really really long lift time, and the van door motors are rather low power. Why don't you look into using an extra CIM motor through a dewalt transmission as detailed in the Nothing but Dewalts whitepaper. If you need the hard to backdrive properties of the van door, you can always leave the anti-backdrive pins in the edwalt transmission. With proper gearing you could probably get your lift time down to 3-4 seconds.

Is 4 the limit of CIM motors you can use? If we already use 4 what other motor besides the Van Door would work, if any?:confused:

EricH 03-02-2008 13:32

Re: 816's Robot as of 2/2/08
 
Quote:

Originally Posted by chinckley (Post 691382)
Is 4 the limit of CIM motors you can use? If we already use 4 what other motor besides the Van Door would work, if any?:confused:

FP, RS550, Window, Globe are your other options. FP is pretty good for lifts and arms, and apparently the RS550 is similar to it.

Danny McC 03-02-2008 13:36

Re: 816's Robot as of 2/2/08
 
Thats a pretty sexy robot IMO. Lets just hope we can do as good as it looks =)


All times are GMT -5. The time now is 03:49.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi