Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   gyro (http://www.chiefdelphi.com/forums/showthread.php?t=63215)

captainking 03-02-2008 20:01

gyro
 
our gyro broke and we can't find out where to get a new one? what do we do?

Phalanx 03-02-2008 20:13

Re: gyro
 
You can buy a similar/better one for $69.95 plus shipping below. Just be aware that the pin out order is different on these compared to the one provide in the KOP and they fry if you hit them with reverse polarity.

150 degrees/sec
http://www.sparkfun.com/commerce/pro...roducts_id=396

300 degrees/sec
http://www.sparkfun.com/commerce/pro...roducts_id=395

captainking 03-02-2008 22:12

Re: gyro
 
thanks, also, three question,
1) these are first legal right?
2) is the pwm input the same? as in I'd put the same pins in the same order that I'd put in the KOP one?
3) this is compatible with this years controller right?

Phalanx 03-02-2008 22:23

Re: gyro
 
Quote:

Originally Posted by captainking (Post 691695)
thanks, also, three question,
1) these are first legal right?
2) is the pwm input the same? as in I'd put the same pins in the same order that I'd put in the KOP one?
3) this is compatible with this years controller right?

1) Yes, they are legal. They are a COTS item.

2) PWM input on the RC side is the same. The PWM connection on the GRYO board is different. On the RC end(female) they are (in order) GND, +5V, SIG. On the GYRO board side(male) they are +5V, GND, SIG. Note that the GND and +5V pins are swapped on they GYRO board.

3) Yes ,it is compatible with this years controller, and several years prior as well.

eugenebrooks 03-02-2008 22:25

Re: gyro
 
Quote:

Originally Posted by captainking (Post 691695)
thanks, also, three question,
1) these are first legal right?
2) is the pwm input the same? as in I'd put the same pins in the same order that I'd put in the KOP one?
3) this is compatible with this years controller right?

1) Yes
2) The connections are marked on the gyro.
Hook up the gnd to black, rate to white
and 5v to red on an analog input.
3) Yes


All times are GMT -5. The time now is 15:02.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi