Chief Delphi - Team 384's Electrical Board!!!

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)

- - Team 384's Electrical Board!!! (http://www.chiefdelphi.com/forums/showthread.php?t=63693)

sayso_411

09-02-2008 22:40

Team 384's Electrical Board!!!

Alright this is Sparky's electrical board:

Hope we didn't make any team jealous!!! :p

Great Job by Mr. Jeff, Tri and me!!!
*the PWM's are still to be cut to custom size and put on :)

bobdahaxor

10-02-2008 22:42

Re: Team 384's Electrical Board!!!

7 victors and 4 spikes!!!! what are you powering with all of that?

Michael Coleman

10-02-2008 22:51

Re: Team 384's Electrical Board!!!

Very nice!

Check the wiring for the top two Victors in the second photo. It looks like the positive and negative connections are reversed.

popo308

10-02-2008 22:56

Re: Team 384's Electrical Board!!!

Quote:

Originally Posted by bobdahaxor (Post 696295)

7 victors and 4 spikes!!!! what are you powering with all of that?

we have 10 victors and 1 spike.... :ahh:

thefro526

10-02-2008 22:59

Re: Team 384's Electrical Board!!!

Thats one clean electrical bored. Where did you get the nifty right angle crimp connectors?

lukevanoort

10-02-2008 23:03

Re: Team 384's Electrical Board!!!

7 Victors and 4 spikes isn't that bad. We have 7 Victors and 2 Spikes, and I imagine Sparky is probably just using a couple more cylinders than us. We've gone up to eight victors before, and I've seen as many as twelve used.

Zack Briggs

11-02-2008 00:01

Re: Team 384's Electrical Board!!!

I'm jealous. My team doesn't design around a set electronics board beforehand, we just get whatever random space is left and have to work with it :rolleyes: .

sayso_411

14-02-2008 14:43

Re: Team 384's Electrical Board!!!

Quote:

Originally Posted by bobdahaxor (Post 696295)

7 victors and 4 spikes!!!! what are you powering with all of that?

Keep guessing you will see at the nationals:p

Quote:

Originally Posted by Zack Briggs (Post 696361)

I'm jealous. My team doesn't design around a set electronics board beforehand, we just get whatever random space is left and have to work with it :rolleyes: .

Yea we had the chasis and we designed around that dimensions

mizitchell

14-02-2008 16:54

Re: Team 384's Electrical Board!!!

There are also no wires running to the MAXI (gold colored) fuse panel for the CIMs.

Jim E

14-02-2008 17:44

Re: Team 384's Electrical Board!!!

All Grounds from the Victors need to run directly to the Distribution Block.

eugenebrooks

14-02-2008 21:36

Re: Team 384's Electrical Board!!!

Quote:

Originally Posted by Jim E (Post 699008)

All Grounds from the Victors need to run directly to the Distribution Block.

As per recent QandA traffic, grounds from the victors are not
required to be run directly to the distribution block, but wiring all
40 amp ground returns to the distribution block, as shown
in the provided wiring diagram, is a really good idea. I have
seen a lot of fried pushons and these were operating at currents
much lower than the CIM motor draws.

Eugene

Jim E

14-02-2008 21:51

Re: Team 384's Electrical Board!!!

Thanks for the clarification. Thats what I meant.

All times are GMT -5. The time now is 19:31.