pic: The 12' reach
 

Re: pic: The 12' reach
 

why 12 feet? that is quite a reach for a game that requires only half that....

Re: pic: The 12' reach
 

is the twelve feet so you can score over other robots on the field trying to play defense? it seems to be putting a bit of uneccesary weight on the robot

Re: pic: The 12' reach
 

With the ball in your gripper, how does the robot not break the 80" rule <R16>? I would guestimate that at a horizontal position the arm is about 100-110" long. And, as asked before, why the 12 feet?

Bengineer

Re: pic: The 12' reach
 

If u have any questions just send me a private message and ill answer all of ur questions to the best of my ability!! I actually think the height is around 10.3' roughly! I was only exagerating alittle on the height!! lol jeez

Re: pic: The 12' reach
 

I would tend to agree. You guys will need to be VERY wary of <R16> at competition. I suggest being prepared to demonstrate your software that prevents it from exceeding 80".

Re: pic: The 12' reach
 

Yah we have a limit switch to stop it from goin that high and we have a program for it too so its is fine.. lol we have to arm so we can pick the ball off the rack and hurdle it over and then put the ball on at the end on the match too. oh and yah u didnt see our mecanum wheels too so we will be fast too. we plan on scoring alot of points for our alliance and helping them out at competition!

Re: pic: The 12' reach
 

Rule <R16> clearly states that "There are no height limits for a robot in its playing configuration at any time after the start of the match."
Our robot starts out at just about 56". (That's vertically.):cool:

Re: pic: The 12' reach
 

Just so everyone knows, I posted the above thread about <R16>, so if anyone has anything to say about it, please contact me instead, so he doesn't get the "blunt" of it.:o

Re: pic: The 12' reach
 

Yes but what they are talking about is not vertically, its horizontally, when that arm rotates outward at any point does it break 80" in its maximum horizontal dimmension. in your case this would probably mean back corner of say left bumper to right front of gripper.

They are just trying to help, this is actually a really easy rule to break. We can break it we just will have to impliment software to stop it.

Re: pic: The 12' reach
 

Yes we misinterpreted the rule and so we have to move the arm back so it will fit!! But yah we just need to make these few adjustments and we will be ready!! Thanks for pointing that out ben!!

Re: pic: The 12' reach
 

Just think what would have happened if he hadnt...
that would have been a major disappointment for the team )=

Re: pic: The 12' reach
 

:yikes: Yah! but we had some one reading the rules anyways and they came upon that rule right after i read the message!!! Thank you so much and good luck at competition!!