Chief Delphi - pic: 987 Teaser #2

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: 987 Teaser #2 (http://www.chiefdelphi.com/forums/showthread.php?t=63939)

KF987

13-02-2008 00:26

pic: 987 Teaser #2

loading photo ...

Kilroy0846

13-02-2008 00:27

Re: pic: 987 Teaser #2

You guys suck :D

Looks good

octothorpe

13-02-2008 00:53

Re: pic: 987 Teaser #2

Nice pneumatics panel. Very clean layout – it reminds me of an airplane cockpit or something. Do you have a manual release valve on it somewhere?

Brad Voracek

13-02-2008 01:00

Re: pic: 987 Teaser #2

Hmm... something to look out for, it seems that knob there is the only regulator on the robot, with one gauge being for overall pressure and the second being for system. If that is the only regulator keep in mind that the one with the yellow fitting -must- be used as a second system regulator if it is used..

At least this is how it was for the past couple years, so you may want to look it up and switch that one out... before it's too much of a hassle =)

KF987

13-02-2008 01:07

Re: pic: 987 Teaser #2

Quote:

Originally Posted by octothorpe (Post 697877)

Nice pneumatics panel. Very clean layout – it reminds me of an airplane cockpit or something. Do you have a manual release valve on it somewhere?

Our manual release valve is tee'd off of our compressor

-Keaton

Nuttyman54

13-02-2008 09:47

Re: pic: 987 Teaser #2

Very nice! I love the burnished look. Looks like you're using different tread that previous years. Why the reason for the change (or are they not for the drivetrain?)

All times are GMT -5. The time now is 14:31.