Chief Delphi - Where to connect IR bored?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)

- - Where to connect IR bored? (http://www.chiefdelphi.com/forums/showthread.php?t=64255)

iPilipino

16-02-2008 11:45

Where to connect IR bored?

I was wondering, where do we connect the power and ground for the IR board?

Beck	16-02-2008 12:09

Re: Where to connect IR bored?

The board can be powered by either the main 12v power, or you could wire it off of the backup battery.. From what I can gather, most people are running this thing off of a 20A breaker on their main breaker panel. You can see what folks said when I asked the same question at http://www.chiefdelphi.com/forums/sh...ad.php?t=63475

--Tracy

Trav-O

18-02-2008 10:29

Re: Where to connect IR bored?

you can also use the digital in/out pins for power... does anyone know which pins in the pwm you would use for ground and power with this method? is it just red and black (expectable)

i really dont wanna risk reversing the polarity because aparently whoever designed the IR board knows nothing about diodes

All times are GMT -5. The time now is 02:38.