Chief Delphi - Mounting the IR board

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Mounting the IR board (http://www.chiefdelphi.com/forums/showthread.php?t=64391)

Aratznes_Scythe

17-02-2008 16:51

Mounting the IR board

How have you all been mounting your IR boards on the robot? We are unsure of how/where to mount ours and would like some advice. Thanks so much!!

Danny McC

17-02-2008 16:52

Re: Mounting the IR board

You can pretty much mount it anywhere. Just make sure that it can get the signal from the remote.

tseres

17-02-2008 17:19

Re: Mounting the IR board

we put the back on some plexuglass, then zip-tied i to our tower :)

Barak Shelef

18-02-2008 01:23

Re: Mounting the IR board

we mounted it on some insulating foam and bolted it to the robot and added some protections around it.

popo308

18-02-2008 02:07

Re: Mounting the IR board

Quote:

Originally Posted by Barak Shelef (Post 701363)

we mounted it on some insulating foam and bolted it to the robot and added some protections around it.

we mounted it safely on the electronics board within our robot the soldered on some extension cables and put the sensor at the highest point of our bot... :D it seems to work very well

All times are GMT -5. The time now is 23:13.