Chief Delphi - Lap Counter Wieght

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Lap Counter Wieght (http://www.chiefdelphi.com/forums/showthread.php?t=64454)

Pelicano234

18-02-2008 10:53

Lap Counter Wieght

Does the Lap Counter count as part of your weight? If yes, About how much does it weigh?

AndyB

18-02-2008 10:56

Re: Lap Counter Wieght

No, I do not think it counts as part of your weight. However, I draw this conclusion only because they have never added the flag onto the robot while weighing it in the past. Your flag holder however does.

I would still check with Q&A though to see.

JohnBoucher

18-02-2008 11:17

Re: Lap Counter Wieght

The unit is the size of a matchbox. Very light.

EricH

18-02-2008 11:23

Re: Lap Counter Wieght

Quote:

Originally Posted by AndyB (Post 701530)

The flag is not part of the weight this year (<R13>), and the lap counter is attached to the flag. Based on that, I would say that the counter does not count in your weight, but the PWM cable run to the flag holder does.

Al Skierkiewicz

20-02-2008 09:45

Re: Lap Counter Wieght

Eric is correct, the flag is inserted in a rubber stopper and the lap indicator is mounted to the stopper. There is a requirement that there be a clear area around the top of your flag holder 2" in diameter for at least 180 degrees and visible from above. Please be sure to mount your flag holder at the specified height. Please review R17 and R18 to insure you are in compliance and the top of the flag holder is specified at 51" +/- 1" per Team update 5.

All times are GMT -5. The time now is 14:26.