Where did all the magic smoke go?
 

So, how my team has let out the magic smoke:

-Fried the ends of alligator clips when a team mate shorted it on a battery
-fried 3 servos, 2 encoder boards when we put 12 volts to them through main breaker panel
-fried a y-cable that was hanging loose and it made contact with a live terminal

thankfully there weren't any victors, spikes or cameras in there... not sure if the RC is damaged, but still seems functional.

So, what has your team done?

Re: Where did all the magic smoke go?
 

fortunatly no magic smoke this year (knocks on wood). Our team has all the newbies and froshies whipped into shape to not create this wonderful magic smoke.

Re: Where did all the magic smoke go?
 

oh noes teh magic smoke.

We have not released the magic smoke (crosses fingers) this year. Since we pray to the magic smoke gods to make sure it stays in there after it is trapped.

Re: Where did all the magic smoke go?
 

we jump start lasted year robot....... yesterday

Re: Where did all the magic smoke go?
 

We got some last Sunday. The electrical guys got a potentiometer soldered up, but they didn't look at the wiring diagram so we plug it in and the smoke came.

Oh yeah, I inverted the - and + on the IR board, but that just smelled bad(and doesn't work anymore). Why did they make - the grey wire and + black!!!

Re: Where did all the magic smoke go?
 

we fried a few pwm cables this year.

Re: Where did all the magic smoke go?
 

This is our rookie year and (luckily) there was no magic smoke (yet...)

Re: Where did all the magic smoke go?
 

we had a motor go up in smoke really bad it was like a fog machine went off.... that motor on our lifter has burnt about 4 times.... i think we should order more victors :D

Re: Where did all the magic smoke go?
 

We havent let any smoke out..... but we did rip the radio port of the robot controller.:(

Re: Where did all the magic smoke go?
 

our yellow spike fuse keeps burning out from the compressor... does that count? =]

Re: Where did all the magic smoke go?
 

today on the last day of build my great thinking mentor(who graduated 2 years ago) told me 2 hook the IR board in the wrong way and i fried somithing in it because i switchd the polarity:mad:
now its useless:mad:

Re: Where did all the magic smoke go?
 

No. It's preventable. That particular fuse and ONLY that fuse can be replaced with a 20A snap-action circuit breaker. I would suggest you replace it before ship.

Re: Where did all the magic smoke go?
 

I believe this is our third or fourth magic-smoke free year in a row. We are very diligent in training our electronics team how not to do things, ad we leave the more accident prone things for the more experienced members or mentors.

Re: Where did all the magic smoke go?
 

Fortunately, no magic smoke. Unfortunately, much ordinary smoke from soldering irons. Although the first time we attempted 2008 OI with 2008 robot (we normally test one at a time with an older, proven functional robot/OI), the OI trim was off a great amount and the joystick ports were switched. I will now choose this moment to mention that I led the OI team. :o

Re: Where did all the magic smoke go?
 

The largest amount of magic smoke we released this year was when a PWM cable came loose from a spike and the negative contacted the positive lead, creating a short through the robot controller and a lot of smoke. Magically, everything but the charred PWM wire was still OK.