![]() |
pic: Team 190 2008 Teaser 1
|
Re: pic: Team 190 2008 Teaser 1
Wow Lexan, that's a first for you guys isn't it?
|
Re: pic: Team 190 2008 Teaser 1
I don't know if that was a sarcastic statement, but I'll answer the non-sarcastic answer. Team 190 in 2002 built their robot almost completely out of lexan (I know this because at battlecry that year they got pulled in half and I helped fix it).
Looks good 190 |
Re: pic: Team 190 2008 Teaser 1
Quote:
|
Re: pic: Team 190 2008 Teaser 1
I was a mentor on 190 those years. I just forgot my smiley. :rolleyes: I actually have a section of the 2k3 lexan "Wings of DOOM" in my office (it's really a cubicle).
|
Re: pic: Team 190 2008 Teaser 1
wheres the suction guys ?? :rolleyes:
|
Re: pic: Team 190 2008 Teaser 1
Yeah... 190 '04 was definitely something to be marvelled at.
We competed with them at the Wonderland Invitational at Canada's Wonderland, Ontario, Canada. We won, with the assistance of 1241, and 1114. 1241's massive 5pt ball catching net, and amazing human player, and our flawless autonomous teamed up to score ridiculous points. I recall one match where 190 hung in autonomous and spread their lexan wings, and I think we just slammed our claw right on top of their wings, and hung anyway. |
Re: pic: Team 190 2008 Teaser 1
Quote:
This was at the 2004 NJ Regional. In the semis (or quarters?) my team (#11, MORT) hung on team 237 (who could strafe back and forth on the bar). The referees deemed us not hanging because we were attached to them. |
Re: pic: Team 190 2008 Teaser 1
Quote:
The rule was that if your support (other than the bar) was removed, and the robot would still be hanging from the bar, then you were hanging. At least that's how the L.A. refs called it. (314 on top of 330 in the second or third finals match. Literally on top of, as well as figuratively.) Oh, well, hopefully the reffing will be more consistent this year, with the ref training course. |
Re: pic: Team 190 2008 Teaser 1
I dont recall whether we were actually on top of their wings or if we'd managed to slide our claw under theirs... either way, I know we got the points, and it WAS a first year offseason event, so reffing might not have been 100% accurate.
|
Re: pic: Team 190 2008 Teaser 1
Lets not get on a tangent. I see a segmented upper claw with a window motor without window tape. I'm still trying to figure out the offsets on the pinned cross tubes. With the presence of the pot, I'm guessing this is an early picture of some sort of powered ball feeding device, an articulated upper arm to fit inside the starting configuration, or an elaborate ploy to avert our attention from their obvious anti-gravity CVT with onboard INS, GPS, and scented pine tree air freshener.
|
Re: pic: Team 190 2008 Teaser 1
Quote:
|
Re: pic: Team 190 2008 Teaser 1
Quote:
|
Re: pic: Team 190 2008 Teaser 1
Quote:
I might have to get one of these to you guys just so you have a spare when the first one wears out. ![]() |
| All times are GMT -5. The time now is 16:30. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi