Chief Delphi - autonomous mode

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - autonomous mode (http://www.chiefdelphi.com/forums/showthread.php?t=64589)

kDude

19-02-2008 14:55

autonomous mode

Question, do we need the IR board/sensor to initiate autonomous mode at the beginning of the round? I've heard that officials change all the robots to autonomous mode when the round starts automatically.

T3_1565

19-02-2008 14:56

Re: autonomous mode

you don't need it unless you programmed your auto to start with the ir, other than that, put it in the right spot in the code, and first will do the rest!!

SL8	19-02-2008 14:58

Re: autonomous mode

No you do not need to have the IR decoder board. The officials start autonomous through the radio.

kDude

19-02-2008 15:02

Re: autonomous mode

Sweet, thanks. Now if only we had our robot...

SL8	19-02-2008 15:26

Re: autonomous mode

Quote:

Originally Posted by T3_1565 (Post 702525)

you don't need it unless you programmed your auto to start with the ir, other than that, put it in the right spot in the code, and first will do the rest!!

Whether or not you programmed it to " start with autonomous" the autonomous routine will still start and run without the IR Board.

All times are GMT -5. The time now is 09:01.