pic: 1024's Toughened Toughbox
 

Re: pic: 1024's Toughened Toughbox
 

Just a guess....but the reason you needed to reinforce it is because you are using a two stage planetary gearbox between the motors and the Toughbox, thus greatly increasing the torque being fed into the Toughbox...right?

Re: pic: 1024's Toughened Toughbox
 

Any chance you can share you sources on the banebot heat sinks? The tough box looks excellent by the way good use of your own capabilities.

Re: pic: 1024's Toughened Toughbox
 

To answer the last question first, techtiger1, those are not BaneBots motors, but rather Fisher-Price motors. At any rate, the heatsinks are available from this supplier. Many will tell you to put cooling fans, grease, and whatever else on them as well, but we've had good luck with them just clipped on with decent space around them.

Squirrel, yes, that's why. There ends up being a 900:1 reduction by the time everything's said and done in this multistage gear and singlestage chain reduction... so I'm guessing you can kind of see where all that torque/stress comes from. :rolleyes:

-q