Chief Delphi
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   Team 1735 - Green Reapers Robot (http://www.chiefdelphi.com/forums/showthread.php?t=64969)

dk5sm5luigi 23-02-2008 19:00
Team 1735 - Green Reapers Robot
 


Here is our 2008 robot from the morning of ship.

Devibeast 23-02-2008 19:31
Re: Team 1735 - Green Reapers Robot
 
The claw idea was mentioned for our manipulator but we never thought it would work >.<

BrendanB 23-02-2008 19:33
Re: Team 1735 - Green Reapers Robot
 
Cool i like the fencing. Are you going to GSR???????:confused:

dk5sm5luigi 23-02-2008 19:39
Re: Team 1735 - Green Reapers Robot
 
Quote:
Originally Posted by BrendanB (Post 705882)
Cool i like the fencing. Are you going to GSR???????:confused:
No, we are going to Boston.

Nuttyman54 23-02-2008 20:29
Re: Team 1735 - Green Reapers Robot
 
D-FENCE! Looks good, we'll be cheering for you in Boston!

burkey_turkey 23-02-2008 22:43
Re: Team 1735 - Green Reapers Robot
 
nice design, that looks like a very lightweight but sturdy arm. i wish i could see it in action. any videos?

ReaperGoat 24-02-2008 01:27
Re: Team 1735 - Green Reapers Robot
 
Quote:
Originally Posted by burkey_turkey (Post 705982)
nice design, that looks like a very lightweight but sturdy arm. i wish i could see it in action. any videos?
As far as I know, we haven't got any video yet. The entire robot is extremely lightweight - one person can lift it quite easily.

carolynn4848 07-07-2008 19:38
Re: Team 1735 - Green Reapers Robot
 
hi nick!!! We have one smexy robot, dont we?

commodoredl 07-07-2008 21:08
Re: Team 1735 - Green Reapers Robot
 
What happened to the sweet scythe you guys put in? :P

vivek16 08-07-2008 18:51
Re: Team 1735 - Green Reapers Robot
 
Say, what material did you use for the claw? Steel conduit? Fiber glass?

thanks, Vivek

carolynn4848 08-07-2008 19:03
Re: Team 1735 - Green Reapers Robot
 
Quote:
Originally Posted by vivek16 (Post 755959)
Say, what material did you use for the claw? Steel conduit? Fiber glass?

thanks, Vivek
*shrugs shoulders* i dont know, but i do know it didnt work

vivek16 08-07-2008 19:35
Re: Team 1735 - Green Reapers Robot
 
Darn!

Were there any non roller or grabber claws that worked?

I am talking about something like driving against the ball when its against a wall and have the ball get "trapped" in the claw.

Our manipulator design requires the ball to be able to escape out the top but not so much the sides or front.

thanks, Vivek

carolynn4848 08-07-2008 19:40
Re: Team 1735 - Green Reapers Robot
 
Quote:
Originally Posted by vivek16 (Post 755968)
Darn!

Were there any non roller or grabber claws that worked?

I am talking about something like driving against the ball when its against a wall and have the ball get "trapped" in the claw.

Our manipulator design requires the ball to be able to escape out the top but not so much the sides or front.

thanks, Vivek
I'm sorry. I am so unhelpful.
We don't even deal with the ball anymore, we use our speed. We just race around in circles..... or try to at any rate.

clydefrog88 08-07-2008 19:44
Re: Team 1735 - Green Reapers Robot
 
Vivek, look up 230's robot from this year (Gaelhawks). Their ball acquisition mechanism is similar to what i think you're describing.

vivek16 08-07-2008 20:49
Re: Team 1735 - Green Reapers Robot
 
Sam,

That is like our manipulator right now except we don't have those long (plastic? fb?) white rods in the front to keep the ball in. We have tried a lot of things but nothing really seems to work. Look at this video to see how our manipulator worked. We are the large black robot with 2264 on the side.

Was 230 able to pick up balls off the ground to hurdle?

thanks, Vivek


All times are GMT -5. The time now is 20:46.
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi