Re: Dewalt 3 speed transmissions for sale
 

I also recieved two transmissions toady. This is a deal here.

Re: Dewalt 3 speed transmissions for sale
 

I got my order today, exactly as advertised (and thanks richardmcc2 for the photos and description).

Teams expecting to use these will find that they need...

1. An input pinion
2. An output shaft
3. A housing with which to manage the gear shifting system

None are insurmountable, or even difficult (unless you try to make them by hand...), but just be aware that there is some work necessary. The paper "Nothing but DeWalts" (in the CD Media whitepaper section) covers this thoroughly.

Still a bargain at twice the price.

Don

Re: Dewalt 3 speed transmissions for sale
 

how much in cost of parts is required to take these from box to bot?

Re: Dewalt 3 speed transmissions for sale
 

What is the OD of the assembly shown?

Re: Dewalt 3 speed transmissions for sale
 

About $70 for the FP and Globe motors, a bit less for CIMs, if you follow the whitepaper. You save about $15 over buying all the parts including the transmission. It can be done cheaper too, especially if you use the pinions from an extra transmission as the input gear (same size) and make your own output shaft.
The part just above the black speed ring is about 2.0 inches in diameter.

Re: Dewalt 3 speed transmissions for sale
 

take the part numbers you need from the NBD whitepaper here:
http://www.chiefdelphi.com/media/papers/1592

then order from Dewaltservicenet here:
http://www.dewaltservicenet.com/

Re: Dewalt 3 speed transmissions for sale
 

Hello Teams, I want to thank all of you that have purchased transmissions from me. I have a retailer who has offered me alot of money to buy out what I have left. I told him today that I would check my inventory and call him on Monday. I would much rather sell to you guys so you can keep your cost down, but I can't pass this up. If you want some please e-mail this weekend so I can take them out of my inventory before he buys them all. All transmissions will need to be paid for by Monday morning.
Thanks to all
Wayne Orr :D
toniorr@kc.rr.com

Re: Dewalt 3 speed transmissions for sale
 

Team 418 bought 2 transmissions from Wayne, and they arrived almost faster than he could have hand-delivered them. If you currently use DeWalt transmissions on your robot, it is definitely worth the money to buy some extras for spares!

-Danny

Re: Dewalt 3 speed transmissions for sale
 

Ok teams the retailer did buy alot of my inventory but not all it. So I do still have some left. :D Again e-mail with your info and then I can send out a request for funds.
Thanks for everything
Happyman
Wayne
toniorr@kc.rr.com

Re: Dewalt 3 speed transmissions for sale: Pinions for FP?
 

Where are people getting the pinions from to use on FP motors on this transmission ?

Re: Dewalt 3 speed transmissions for sale: Pinions for FP?
 

I believe people take one the planet gears to use as a pinion.

Re: Dewalt 3 speed transmissions for sale: Pinions for FP?
 

According to the "NBD" White paper, they may be obtained from the first stage of the transmissions when they are removed for use with a CIM motor. For $15, buying and extra transmission is cheap! Or you could buy a few. Use two for your CIMs, then you will have 8 pinions for other motor, four from each tranny.

Re: Dewalt 3 speed transmissions for sale
 

I'll grab two if you have any left.

jtkellertx@gmail.com

Re: Dewalt 3 speed transmissions for sale
 

how do i contact you to buy a couple of these please replay or call at (559)232-6393

Re: Dewalt 3 speed transmissions for sale
 

Please e-mail at toniorr@kc.rr.com I don't visit this site enough to keep up here.
Thanks to all that have purchased from me.
Wayne Orr